Catalog

  • number-series-plug-and-cap
  • Caps-and-Plugs-GP-Series-Schematic
Features:
  • Protects against damage, dirt, moisture, and corrosion during storage and shipping.
  • The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.
How to measure in order to assure a proper fit for both caps and plugs:
  • Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
  • Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.
226 - 229 of 229 | Results Per Page | View | Unit of Measure
« 6 7 8 9 10 
Request Information Compare Items

Item #

Material

Color

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Dimension F

Sort by
N/A Low-Density Polyethylene N/A Red N/A 10.15 in257.81 mm N/A 9.93 in252.22 mm N/A 10.73 in272.54 mm N/A 1.35 in34.29 mm N/A N/A
N/A Low-Density Polyethylene N/A Red N/A 12.14 in308.36 mm N/A 11.975 in304.17 mm N/A 12.7 in322.58 mm N/A 1.35 in34.29 mm N/A N/A
N/A Low-Density Polyethylene N/A Red N/A 6.04 in153.42 mm N/A 5.985 in152.02 mm N/A 6.61 in167.89 mm N/A 1.28 in32.51 mm N/A N/A
N/A Low-Density Polyethylene N/A Red N/A 8.07 in204.98 mm N/A 8.03 in203.96 mm N/A 8.61 in218.69 mm N/A 1.29 in32.77 mm N/A N/A
226 - 229 of 229 | Results Per Page | View | Unit of Measure
« 6 7 8 9 10