Series ADP Plugs have a dimpled nose section that forms a low pressure seal with flareless tube ends. The addition of a neoprene shoulder gasket enables the ADP-GN to provide a positive seal on the spot face of the O-ring port. Gaskets are also optionally available in Butyl or Buna N rubber.
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Item #

Material

To Fit Tube Size

To Fit Thread Size

Dimension B

Dimension C

Dimension D

ADP-2 N/A 3003-0 Aluminum Alloy N/A 5/32 in N/A 5/16"-24 N/A 0.340 in N/A 0.470 in N/A 0.520 in
ADP-3 N/A 3003-0 Aluminum Alloy N/A 3/16 in N/A 3/8"-24 N/A 0.280 in N/A 0.570 in N/A 0.520 in
ADP-4 N/A 3003-0 Aluminum Alloy N/A 1/4 in N/A 7/16"-20 N/A 0.290 in N/A 0.61 in N/A 0.540 in
ADP-5 N/A 3003-0 Aluminum Alloy N/A 5/16 in N/A 1/2"-20 N/A 0.32 in N/A 0.700 in N/A 0.550 in
ADP-6 N/A 3003-0 Aluminum Alloy N/A 3/8 in N/A 9/16"-18 N/A 0.33 in N/A 0.760 in N/A 0.600 in
ADP-7 N/A 3003-0 Aluminum Alloy N/A 7/16 in N/A 5/8"-18 N/A 0.310 in N/A 0.900 in N/A 0.59 in
ADP-8 N/A 3003-0 Aluminum Alloy N/A 1/2 in N/A 3/4"-16 N/A 0.430 in N/A 0.940 in N/A 0.72 in
ADP-10 N/A 3003-0 Aluminum Alloy N/A 5/8 in N/A 7/8"-14 N/A 0.49 in N/A 1.110 in N/A 0.740 in
ADP-12 N/A 3003-0 Aluminum Alloy N/A 3/4 in N/A 1 1/16"-12 N/A 0.470 in N/A 1.38 in N/A 0.81 in
ADP-16 N/A 3003-0 Aluminum Alloy N/A 1 in N/A 1 5/16"-12 N/A 0.450 in N/A 1.530 in N/A 0.820 in
ADP-24 N/A 3003-0 Aluminum Alloy N/A 1 1/2 in N/A 1 7/8"-12 N/A 0.630 in N/A 2.520 in N/A 0.930 in
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1