Catalog

Features:
  • Heavy-duty design includes a rugged wall and seal rings for maximum protection.
  • The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.
How to measure in order to assure a proper fit for both caps and plugs:
  • Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
  • Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.
Request a Quote
Unit of Measure
Items
GP-Series-Cap-and-Plug

GP-Series-Cap-and-Plug

GP-Series-Cap-and-Plug

GP-Series-Cap-and-Plug

GP-Series-Cap-and-Plug
Material N/A Low-Density Polyethylene
Color N/A Red
Dimension A N/A 0.325 in8.26 mm N/A 0.389 in9.88 mm N/A 0.501 in12.72 mm N/A 0.757 in19.22 mm N/A 0.851 in21.61 mm
Dimension B N/A 0.292 in7.42 mm N/A 0.32 in8.12 mm N/A 0.437 in11.09 mm N/A 0.658 in16.71 mm N/A 0.766 in19.45 mm
Dimension C N/A 0.531 in13.49 mm N/A 0.563 in14.29 mm N/A 0.647 in16.43 mm N/A 0.921 in23.39 mm N/A 1.045 in26.54 mm
Dimension D N/A 0.375 in9.53 mm N/A 0.438 in11.11 mm N/A 0.438 in11.11 mm N/A 0.648 in16.45 mm N/A 0.625 in15.88 mm
Dimension E N/A 0.215 in5.46 mm N/A 0.212 in5.38 mm N/A 0.352 in8.94 mm N/A 0.538 in13.66 mm N/A 0.609 in15.46 mm
Dimension F N/A 0.25 in N/A 0.285 in N/A 0.42 in N/A 0.662 in N/A 0.74 in