Arizona Sealing Devices, Inc.
Arizona Sealing Devices, Inc.
150 E Alamo Drive, Suite 4
Chandler, AZ 85225-1207

Tel: 480-892-7325
Fax: 480-892-7388
Email: info@azseal.com
Print Back
Features:
  • Protects against damage, dirt, moisture, and corrosion during storage and shipping.
  • The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.
How to measure in order to assure a proper fit for both caps and plugs:
  • Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
  • Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.
number-series-plug-and-cap
Caps-and-Plugs-GP-Series-Schematic
Unit of Measure
« 6 7 8 9 10 

Item #

Material

Color

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Dimension F

K1274A N/A Low-Density Polyethylene N/A Red N/A 6.357 in161.47 mm N/A 6.05 in153.67 mm N/A 7.043 in178.89 mm N/A 1.165 in29.69 mm N/A 5.984 in152 mm N/A 6.299 in160 mm
K1275A N/A Low-Density Polyethylene N/A Red N/A 8.803 in223.6 mm N/A 8.505 in216.03 mm N/A 9.508 in241.5 mm N/A 1.145 in29.08 mm N/A 8.386 in213 mm N/A 8.78 in223.01 mm
K436A N/A Low-Density Polyethylene N/A Red N/A 7.03 in178.56 mm N/A 6.88 in174.75 mm N/A 7.67 in194.82 mm N/A 0.53 in13.46 mm N/A 6.8 in172.72 mm N/A 6.95 in176.53 mm
K5A N/A Low-Density Polyethylene N/A Red N/A 1.525 in38.74 mm N/A 1.525 in38.74 mm N/A 1.713 in43.51 mm N/A 0.5 in12.7 mm N/A 1.445 in36.7 mm N/A 1.445 in36.7 mm
Unit of Measure
« 6 7 8 9 10