Catalog

  • number-series-plug-and-cap
  • Caps-and-Plugs-GP-Series-Schematic
Features:
  • Protects against damage, dirt, moisture, and corrosion during storage and shipping.
  • The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.
How to measure in order to assure a proper fit for both caps and plugs:
  • Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
  • Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.
226 - 229 of 229 | Results Per Page | View | Unit of Measure
« 6 7 8 9 10 
Request Information Compare Items

Item #

Material

Color

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Dimension F

Sort by
N/A Low-Density Polyethylene N/A Red N/A 12.56 in319.02 mm N/A 11.93 in303.02 mm N/A 13.05 in331.47 mm N/A 2.031 in51.59 mm N/A 11.7 in297.18 mm N/A 12.35 in313.69 mm
N/A Low-Density Polyethylene N/A Red N/A 13.14 in333.76 mm N/A 12.79 in324.87 mm N/A 13.64 in346.46 mm N/A 2.031 in51.59 mm N/A 12.53 in318.26 mm N/A 12.92 in328.17 mm
N/A Low-Density Polyethylene N/A Red N/A 13.6 in345.44 mm N/A 13.25 in336.55 mm N/A 14.1 in358.14 mm N/A 2.031 in51.59 mm N/A 13 in330.2 mm N/A 13.4 in340.36 mm
N/A Low-Density Polyethylene N/A Red N/A 0.18 in4.57 mm N/A 0.138 in3.51 mm N/A 0.31 in7.87 mm N/A 6.35 mm N/A 0.051 in1.3 mm N/A 0.118 in3 mm
226 - 229 of 229 | Results Per Page | View | Unit of Measure
« 6 7 8 9 10