Features:

• Can be applied or removed by hand, hex wrench or screwdriver
• The FP series plugs will fit NS and NF Class 1-2-3 standard threads
• Optional O-ring gives this part a watertight seal for superior leakage protection

Features:

• The double sealing ring design on the underside of the flange provides a positive seal
• Design includes five complete threads for a secure fit
• Can be applied or removed with a screwdriver, spanner, socket or allen key
• Head designed not to trap liquid
• The nylon material absorbs paint, keeping paint flakes to a minimum
• Nylon is recommended for intermittent temperatures of 320 ºF (160 ºC) to -40 ºF (-40 ºC)

Features:

• Series accommodates an extensive range of metric and BSP/Gas threaded sizes
• Knurled head for easy grip
• Secure fit for excellent protection against dirt, moisture and corrosion

Features:

• The integral side pull tab feature is designed for easy removal in awkward locations
• The tapered design allows the part to plug multiple inner diameters

Features:

• Plugs threaded or unthreaded holes
• Silicone: premium masking material (due to high temperature rating) can be used multiple times
• EPDM: a more economical material with slightly reduced heat resistance, but superior chemical resistance. Also reusable
• Applications: powder coating, e-coating, plating and anodizing

Features:

• Designed specifically to be used to plug NPT tapered threaded fittings
• The tapered design allows the part to plug multiple inner diameters

Series AFO Plugs are designed for positive, metal to metal threaded protection of fluid lines and fittings. Available with optional neoprene gaskets. Sealing gaskets are also available in Butyl or Buna N rubber.

Designed for protection of 37º flared fittings and straight-threaded ports, series ASP plugs have a nose section that seals on flared fittings without a gasket.  The optional ASP-GN series has an added neoprene shoulder gasket for low-pressure sealing of threaded ports. Special gaskets are also available in Butyl or Buna N rubber.

Series ADP Plugs have a dimpled nose section that forms a low pressure seal with flareless tube ends. The addition of a neoprene shoulder gasket enables the ADP-GN to provide a positive seal on the spot face of the O-ring port. Gaskets are also optionally available in Butyl or Buna N rubber.

Features:

• Can be applied or removed by hand, hex wrench or screwdriver
• Optional O-ring gives this part a water tight seal for superior leakage protection
• The BL4A and the BL4B are in black

Features:

• Threaded plug with a serrated grip (used for a variety of applications)
• Can be applied or removed by hand, hex wrench or screwdriver

Features:

• Heavy-duty design includes a rugged wall and seal rings for maximum protection.
• The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.

• Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
• Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.

Features:

• Protects against damage, dirt, moisture, and corrosion during storage and shipping.
• The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters.

• Plug dimension “A” should be approximately 1% larger than the inner diameter of the part. Minimum of .020”.
• Cap dimension “E” should be approximately 1% smaller that the outside diameter of the part. Minimum of .020”.

Features:

• Series accommodates an extensive range of metric and BSP/Gas threaded sizes
• Knurled head for easy grip.
• Secure fit for excellent protection against dirt, moisture and corrosion.