Arizona Sealing Devices, Inc.
Arizona Sealing Devices, Inc.
150 E Alamo Drive, Suite 4
Chandler, AZ 85225-1207

Tel: 480-892-7325
Fax: 480-892-7388
Email: info@azseal.com
Print Back
Features:

Silicon Features
Internal design provides a positive seal while the wide flange allows for easy removal. Reusable and will not melt or harden
Industries: Powder coating, E-coating, Plating and Anodizing

EPDM Features
Internal design provides a positive seal while the wide flange allows for easy removal. Excellent chemical resistance and reusable.
Industries: Powder Coating, E-coating, Plating, Anodizing and Sand Blasting, Lower cost alternative to Silicone if higher than 350 ºF (176 ºC) is not needed.
SCE Series - Easy Pull Masking Caps
SCE Series - Easy Pull Masking Caps - 2
Unit of Measure
Items SCE Series - Easy Pull Masking Caps
SCE0125A
SCE Series - Easy Pull Masking Caps 		SCE Series - Easy Pull Masking Caps
SCE0125B
SCE Series - Easy Pull Masking Caps 		SCE Series - Easy Pull Masking Caps
SCE0157A
SCE Series - Easy Pull Masking Caps 		SCE Series - Easy Pull Masking Caps
SCE0157B
SCE Series - Easy Pull Masking Caps 		SCE Series - Easy Pull Masking Caps
SCE0187A
SCE Series - Easy Pull Masking Caps
To Assure Proper Fit N/A Silicone Cap inside diameter should be approximately 10 % smaller than the outside diameter of the part.
EPDM Cap inside diameter should be approximately 5-7 % smaller than the outside diameter of the part.
Material N/A Silicone N/A EPDM N/A Silicone N/A EPDM N/A Silicone
Color N/A Natural N/A Black N/A Natural N/A Black N/A Natural
Temperature N/A 600 ºF315 ºC N/A 350 ºF176 ºC N/A 600 ºF315 ºC N/A 350 ºF176 ºC N/A 600 ºF315 ºC
Dimension A N/A 0.125 in3.200 mm N/A 0.125 in3.200 mm N/A 0.157 in4.000 mm N/A 0.157 in4.000 mm N/A 0.187 in4.700 mm
Dimension B N/A 2.000 in50.800 mm N/A 2.000 in50.800 mm N/A 1.180 in30.000 mm N/A 1.180 in30.000 mm N/A 1.377 in34.000 mm